Author Topic: PiR products part(s) gallery  (Read 212506 times)

Offline ckcheong

  • Hitchhiker
  • *****
  • Posts: 134
Re: PiR products part(s) gallery
« Reply #90 on: December 26, 2011, 04:58:45 PM »
some of the bike really look sh*t
but well....i do support customize

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #91 on: December 27, 2011, 07:41:37 AM »
Quote
some of the bike really look sh*t

They just look like how they were supposed to be...
« Last Edit: December 27, 2011, 07:56:53 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline paulbrown692000

  • GF Inhabitant
  • ********
  • Posts: 1265
    • Revelation BMX
Re: PiR products part(s) gallery
« Reply #92 on: December 27, 2011, 06:29:58 PM »
I don't think he means your frames are sh*t.  I think he doesn,t like the geo but that is what the customer wanted.  I don't care for some of the geo but I think everything you make is like art work.  You can tell you take pride in you work. :beer: :)
All things in life are temporary. If going well...enjoy it, they will not last forever. If going wrong don’t worry, they can't last long either.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #93 on: January 20, 2012, 03:55:11 PM »
Custom street frame :




TT = 20.75"
CS = 13.5" slamed
HA = 75°
SA = 71°
Standover = 8.1"
BB height = 11.6"
117 mm long headtube
Spanish BB with internally machining
Caped CS and SS extremitys
Externally machined seat tube
0.19" thick laser cutted dropouts for 14 mm axle, with hidden holes
Weigth : 2100 g


Custom flatland frame :






TT = 19"
CS = 12.9" slamed
HA = 75°
SA = 71°
Standover = 8.83"
BB height = 12.2" / +2.36"
117 mm long headtube
Spanish BB with internally machining
Swaged & pressed CS and SS
Externally machined seat tube
Integrated seat post clamp
0.19" thick laser cutted dropouts for 3/8" axle
Integrated chain tensioner for the drive side
Bent briges
Weight : 1800 g


Flatland custom frame for Chris Böhm :




TT = 18.5"
CS = 12.5" slamed
HA = 74.5°
SA = 71.5°
Standover = 4.96"
BB height = 13.4" / +3.64"
90 mm long headtube with custom machining
Spanish BB with internally and externally machining
Swaged & pressed CS and SS
Externally machined seat tube
New 0.19" thick laser cutted dropouts for 3/8" axle
Integrated chain tensioner on both sides
Front gusset
Weight : 1480 g


Custom bar :



4 pcs bar
Height = 7.5"
Width = 28"
Backsweep = 0°
Upsweep = 2°
Welded plate on the cross-bar for double brake setup
Additionnal holes in the grip tubes to save weight


Custom bar/fork project



add some fun, add a wheel...

The french rider Matthieu Bonecuelle wanted to try this funny thing
Install this on the steer tube of your existing fork and you'll be able to add a 3rd wheel
2 pieces legs to minimize the height of the fork
Pressed legs
42 mm height stem
30 mm rake
2 M8 bolts, 12.9 class
Weight : 600 g
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline ortho

  • Cliffhanger
  • *******
  • Posts: 681
Re: PiR products part(s) gallery
« Reply #94 on: January 20, 2012, 05:19:26 PM »

Custom bar/fork project



add some fun, add a wheel...

The french rider Matthieu Bonecuelle wanted to try this funny thing
Install this on the steer tube of your existing fork and you'll be able to add a 3rd wheel
2 pieces legs to minimize the height of the fork
Pressed legs
42 mm height stem
30 mm rake
2 M8 bolts, 12.9 class
Weight : 600 g



I gotta see a video of this, hahaha

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #95 on: January 21, 2012, 04:24:07 PM »
Quote
I gotta see a video of this, hahaha

Yeah, me too !

Quote
Any thoughts on a PIR/Zodiac colabo?

It was supposed to happen, but unfortunately, Ken doesn't answer my mails anymore. Don't know the reason ?...

Here's a spy pic of my new fork...

« Last Edit: January 21, 2012, 04:27:04 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline melon lover

  • GF Inhabitant
  • ********
  • Posts: 1193
Re: PiR products part(s) gallery
« Reply #96 on: January 21, 2012, 08:05:13 PM »
Quote
I gotta see a video of this, hahaha

Yeah, me too !

Quote
Any thoughts on a PIR/Zodiac colabo?

It was supposed to happen, but unfortunately, Ken doesn't answer my mails anymore. Don't know the reason ?...

Here's a spy pic of my new fork...




would you be able to make a set of 18" forks zero rake forks for my 6 year old ??


if so how much ??

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #97 on: January 25, 2012, 12:53:14 PM »
Here's the first Burr stem combo prototype with his patended wedge system.
Only 1 invisible bolt. There's just a hole on the right side to tighten the screw...
The clamping system (bolt + wedges) can be removed if needed...






« Last Edit: January 25, 2012, 06:56:45 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline stopkaiross

  • Backpacker
  • ******
  • Posts: 389
Re: PiR products part(s) gallery
« Reply #98 on: January 25, 2012, 04:37:26 PM »
wow!
your work is always so amazing, now I need to save up some money!

Offline alaskan

  • Backpacker
  • ******
  • Posts: 268
Re: PiR products part(s) gallery
« Reply #99 on: January 25, 2012, 08:45:46 PM »
best bar-stem combo I've ever seen

Offline robpossible

  • GF Inhabitant
  • ********
  • Posts: 1158
  • Crackpacker to kitchen table
Re: PiR products part(s) gallery
« Reply #100 on: January 25, 2012, 10:04:21 PM »
best bar-stem combo I've ever seen
I agree, I love that secret looking hole.
1st law of thermodynamics: Energy can not be created or destroyed, it only changes in form.

Offline paulbrown692000

  • GF Inhabitant
  • ********
  • Posts: 1265
    • Revelation BMX
Re: PiR products part(s) gallery
« Reply #101 on: January 26, 2012, 03:33:30 AM »
Art work! :beer: :beer:
All things in life are temporary. If going well...enjoy it, they will not last forever. If going wrong don’t worry, they can't last long either.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #102 on: January 26, 2012, 02:52:57 PM »
Thank you for the great comments guys !  :beer:
I'm also very happy with the result...

Here's 1 of the last 3 previous custom frame buit up :

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #103 on: January 30, 2012, 03:42:40 PM »
This is a very special fork, for me.
The fork is very narrow because I use 1.35" Comet tire.
It has a long integrated aluminum headset race to make the fork higher than the usual 12.5" (measured from axle to lower race). In fact it has the same result than a headset slacker...
190 mm long externally machined steer tube.
The legs are almost not pressed because I use the new Flatware Vandero hub so the distance between the flanges is shorter.
The lower extremity of the steer tube has been made to match the wishbone of my frame (second picture).
0.190" thick female dropouts
Weigth : 840 g




« Last Edit: January 30, 2012, 08:45:50 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline mattyhixx

  • Forkglider
  • ***
  • Posts: 49
Re: PiR products part(s) gallery
« Reply #104 on: January 30, 2012, 11:58:08 PM »
Sick! Awesome work!