Yo this is just something i worked on at University here in england.
here's the specs:
19 inch toptube
13-14 rear end
press fit BB for profiles
two part downtube
74.5 head angle
custom dropouts for G-Sport hubs (obviously if it went into production this would be and option not a standard)
integrated seatpost with expansion slot pre-machined, internal diameter is 25.4 so if it's too low cut that sh*t off and stick a regular post and clamp on it. Job done.
Material is T45
Weight is 5 pounds dead.
what do you think?
Andy
www.dftu.com