Author Topic: stuck bearing on crank axle  (Read 7429 times)

Offline hijito

  • Backpacker
  • ******
  • Posts: 322
  • Korosu!
stuck bearing on crank axle
« on: January 08, 2011, 12:44:25 PM »
How do you guys go on about this kind of crap. I wanted to put old cranks on new frame. I have spanish BB and KHE Hindenburg 2-piece cranks. I removed one arm and as usual I wanted to pull the rest out. It was stuck, so I used hammer to get it out.
The thing is, the bearing was stuck so hard there that I hammered out bearing and crank out completely, now the bearing is stuck on the axle. Great, how do I remove it, I dont have any vice or tools really.
I always  put grease so Idk how that could happen.