Global-flat.com Board
English => General Flatland Forum => Topic started by: joestoys on December 25, 2005, 03:37:53 PM
-
Normally what PSI to set for flatland bike tires ? :(
-
Depends of course on your personal preference and your weight.
Around 100PSI is a good average value I think. A lot of people I know prefer high pressure
( high = 120PSI+ )
-
currently pump it a 100 psi.
my weight is 70 Kg.
my old setup (10 years ago) on my morales bike i run two tires with a tube in a rim so to withstand a higher PSI 140 or more. SOLID like a rock
-
my weight = 78kg, and i run 120psi in 100 psi rated tyres (odyssey frequency G's-) its mainly about minimising rolling resistance.
by the way those frequency gees don't seem to have a problem with the higher psi's, although you might need to re-adjust your brakes if you're using the standard 32h wheels...
-
I use Odyssey Frequency G pumped up to 120 psi, my weight is 150 pounds.
-
120 PSI
I wieght 75kg
-
i run the chase tires and now arestic tires
the best darn tires out
anyways i run them at 120 psi
and i weigh 185 pounds
dont knowe what kg that is
heck im not european
lol
lates