Global-flat.com Board

English => Parts & Bikes => Topic started by: JFos on August 25, 2011, 05:39:00 PM

Title: Primo Son of Bomb/Nankai conversion?
Post by: JFos on August 25, 2011, 05:39:00 PM
Anyone remember reading somewhere a loooong time ago, thinking on Backlash about a Son of Bomb shell converted to accept Nankai guts with sealed bearings?


Thanks to the 4th poster down that will give me information and not say "man f that you should....."  Got all the stuff I need i think just wondered about it for a while.

Title: Re: Primo Son of Bomb/Nankai conversion?
Post by: byke on August 25, 2011, 05:59:05 PM
I can't remember it .... But do vaguely remember someone put a sealed euro bearing on the driver side of their nankai.....
Title: Re: Primo Son of Bomb/Nankai conversion?
Post by: rick macdonald on August 25, 2011, 10:34:00 PM
We used to press a sealed bearing into the outer driver side of coaster brakes.  But the problem was no real good collars came in 24tpi, back then it was only cones for unsealed hubs..but we made it work OK with a grinder!
 
 
Title: Re: Primo Son of Bomb/Nankai conversion?
Post by: loque on August 25, 2011, 11:00:08 PM



Thanks to the 4th poster down that will give me information .


Yes what you have to do is take the hub shell and no i dont remember it .