Global-flat.com Board
English => Parts & Bikes => Topic started by: Jodanimal on August 15, 2011, 08:18:12 AM
-
hey guys, I have decided to do a new build. Basically Im taking an old school frame with all new parts. The frame I am using is an 86 General Hustler, Not very popular but in the day it was a great flat bike, obviously there is some sentimental/nostalgic feelings with this build. It was what I first started riding flat when I was A kid. My question is, when doing something like this, what problems will I might run into. Also any advice or suggestions on what parts to use would be greatly appreciated! anything helps!! Thanks!! :beer:
-JD
-
The biggest problem is the 1" headset, but that conversion has already been done, hit the search button for that.
-
Ok, I did a little bit of searching. would I need something like this??
http://www.choppersus.com/store/product/666/Stem---Threadless-Adapter/ (http://www.choppersus.com/store/product/666/Stem---Threadless-Adapter/)
or this maybe??
http://www.deltacycle.com/Stems-Alloy-Threadless-Adapter (http://www.deltacycle.com/Stems-Alloy-Threadless-Adapter)
-
If you want to use a modern fork, stem combo on an old frame...basically, 1 inch head tube with 1 1/8th forks, you can use this method. http://www.global-flat.com/smf/index.php?topic=28925.0 (http://www.global-flat.com/smf/index.php?topic=28925.0)
Those adapters use a 1 1/8 stem to 1 inch fork. Just depends on what forks you want to use. I suggest modern forks...
-
ahh, I see. Very good info, thats exactly what i needed! Thanks!! :D
-JD
-
you might wanna check out
http://www.vintagebmx.com/community/index.php?showtopic=27036698&hl=general (http://www.vintagebmx.com/community/index.php?showtopic=27036698&hl=general)
(http://img.photobucket.com/albums/v108/coastvl/bike%20bits/osborne-2.jpg)
-
cool thread thanks!! lots of old school flat pics there as well!!
:beer: :beer: