NewsPhotosVideosPartsSpotsTricksEventsForumLinksAbout
Paul Component Engineering - High Flange Front


Paul Component Engineering - High Flange Front

Name: High Flange Front
Company: Paul Component Engineering ( All parts of this Company )
Weight: 178 g ( = 0.39 lbs )
Infos: "We machine these hubs from three inch round bars of 6061 aluminum. The hub shells are put through four different machining processes before they go to finishing, and the end result is something we´re very proud of. The wide flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.


The axle is ground from 7075 aluminum, which has a great strength to weight ratio. The outer lock nut faces are made of knurled steel for a solid grip against dropouts. Two axles different axles are available, for a bolt-on or quick-release attachment. Spare parts are available to convert between axle types.

We use high-fill sealed bearings in the High Flange Front, and they can be adjusted with our simple adjuster ring.

Four spoke hole drillings are available from 24 to 36 holes, and the spoke holes are chamfered to reduce stress on the head and elbow of the spoke."

Material: 6061 Aluminum
Dimensions:
Axle Spacing: 100mm
Flange Diameter: 65m
Center to Flange: 32.5mm
Axle
Color black, silver, polished
Sealed high-fill sealed bearings
Spokes 24, 28, 32 or 36
Teeth
Type Front
Navigation



Rating

Current rating:

No rating.

Bad
Good
 

Pictures were taken from: www.flatlandfuel.com , www.soulcycle.com and the websites of the companies which you can find in our links section.

Support global-flat - Join the team | | | Bookmark and Share | Logo | contact: info@global-flat.com
Copyright © global-flat.com