Author Topic: Chimera 'Beloved' Handlebar !  (Read 8740 times)

Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Chimera 'Beloved' Handlebar !
« on: November 20, 2007, 02:36:19 PM »
Chimera 'Beloved' Handlebar

New handlebar from Poland manufatured -
'Beloved' is a new mix -normal and stem handlebar. First handle which is not connected directly with stem. The same tubes system like in Beloved frame. Tube is going directly through on holes in stem, then is welded and cutted for fork space. That give you maximum power in stem/handle conexion. So it's a 5pc stem.
Full cro-mo, steam with 2 bolts, Multiple funny driled in ocean's waves look. This bar is hand made so only what can I say is weight.
For now is 890gr = 1,95 lbs, but lighter version (with offset)is coming soon!
If you will order handle you can choice: Backsweep, Upsweep, Width, height, color and handle/steam possition. Hope you like it !









rmmcel2001

  • Guest
Re: Chimera 'Beloved' Handlebar !
« Reply #1 on: November 20, 2007, 02:52:49 PM »
Holy S H I T! Thats bad ass

Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: Chimera 'Beloved' Handlebar !
« Reply #2 on: November 20, 2007, 02:52:50 PM »
The best part



This handle was first welded and then preper for fork in steam area. That give maximum power in steam conexion. Stem is a little bigger that normal -its 3mm wall thicknes but that's mean that tube from handle is 3mm inside steam wall. Strong as hell  :wacko: ^_^

Re: Chimera 'Beloved' Handlebar !
« Reply #3 on: November 20, 2007, 03:05:24 PM »
Uniquely beautiful Zin. The craftsmanship looked superb at first glance and construction-wise well planned. These bars are like show-chopper meets flatland.
 

To Chimera's "Beloved" bars :beer:


Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: Chimera 'Beloved' Handlebar !
« Reply #4 on: November 20, 2007, 03:09:43 PM »
Thx very much  -_- Price will be probaly around 79 euro  :beer:

Offline stvnlpsly

  • GF Inhabitant
  • ********
  • Posts: 2990
  • Quest BMX
    • Quest BMX
Re: Chimera 'Beloved' Handlebar !
« Reply #5 on: November 20, 2007, 03:23:21 PM »
I don't ride zero offset, but wow!  I can't wait to see the ones with offset.  How much offset?  Same as Swiss Miss?

Re: Chimera 'Beloved' Handlebar !
« Reply #6 on: November 20, 2007, 03:26:30 PM »
The craftsmanship looked superb at first glance and construction-wise well planned.
 

To Chimera's "Beloved" bars :beer:



i cant say the same!

sorry man , but  i m not digging the 3rd picture on the left as  you scroll down.

maybe i m wrong, but i bet i could brake those things in a week, or @ least crack them.

maybe you care to explain  whats going on  with the craftsmanship of the  pic i mentioned?

to be honest, i ve never really  liked the bar-stem combo- ever,(but this is not  the reason i have this point of view on your bars) i dont think it truly can take a beating , and surpass any bar, and stem put together, and  i really think it is a gimmick  as  people  are looking to lighten their bikes.

Re: Chimera 'Beloved' Handlebar !
« Reply #7 on: November 20, 2007, 03:28:38 PM »
How tall are these?

Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: Chimera 'Beloved' Handlebar !
« Reply #8 on: November 20, 2007, 03:30:16 PM »
Not so big offset like in swiss miss  :beer: Those are aound 7,5'' (from center to center  tubes) + few mm from stem  :mellow:

« Last Edit: November 20, 2007, 04:19:55 PM by Zin »

rmmcel2001

  • Guest
Re: Chimera 'Beloved' Handlebar !
« Reply #9 on: November 20, 2007, 05:16:03 PM »
Looks like a pain to install the stem bolt

rmmcel2001

  • Guest
Re: Chimera 'Beloved' Handlebar !
« Reply #10 on: November 20, 2007, 05:47:07 PM »
Looks like a pain to install the stem bolt

What?
Oh, I guess you mean the compression bolt to tighten the headset.
Yeah, looks like a lot of fun! ^_^

Thats what I meant. The compression bolt. Sorry :beer:

Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: Chimera 'Beloved' Handlebar !
« Reply #11 on: November 20, 2007, 05:59:48 PM »
Looks like a pain to install the stem bolt

What?
Oh, I guess you mean the compression bolt to tighten the headset.
Yeah, looks like a lot of fun! ^_^

Thats what I meant. The compression bolt. Sorry :beer:

There is no problem with this  ^_^ Pawel tell me that this crossbar is even to high haha  ^_^ Normal you can even choice crossbar high in max 1cm up  :mellow: Now i'ts something like 17mm  :beer:

Offline Erik Otto

  • GF Inhabitant
  • ********
  • Posts: 1586
  • The Brotherhood for life.
    • Monolithic Flatland
Re: Chimera 'Beloved' Handlebar !
« Reply #12 on: November 20, 2007, 06:45:47 PM »
I like this.  What colors will they be in?

Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: Chimera 'Beloved' Handlebar !
« Reply #13 on: November 20, 2007, 07:09:06 PM »
I like this.  What colors will they be in?

you can choice: Backsweep, Upsweep, Width, height, color and handle/steam possition.
  :mellow:

 :mellow:

Offline alex caps

  • Hitchhiker
  • *****
  • Posts: 189
Re: Chimera 'Beloved' Handlebar !
« Reply #14 on: November 21, 2007, 12:09:03 AM »
I think you have a very well designed handlebar!  The question is, how much stress can they take?  If they are strong.. then Good Job!  This is unlike any bar I am familar with, very slick design!