Author Topic: FEDERAL/KHE v2 FREECOASTER DRIVER...  (Read 1548 times)

Offline broke_khe

  • Backpacker
  • ******
  • Posts: 304
FEDERAL/KHE v2 FREECOASTER DRIVER...
« on: March 02, 2019, 06:29:54 AM »
I cannot find it anywhere!! >:(   What driver will work ? Will the KHE  geisha 11t driver work with The FEDERAL /V2 frecoaster?? If not, which driver works with this hub?? Thanks

Offline DaddyCool

  • Deathtrucker
  • ********
  • Posts: 860
Re: FEDERAL/KHE v2 FREECOASTER DRIVER...
« Reply #1 on: March 03, 2019, 02:05:31 PM »
Hi, have a look here:https://bikers-base.de/-SALE-/Sale-Laufraeder-Co-/Sale-Naben-Zubehoer/KHE-Astern-Freecoaster-BMX-Driver-11T-RHD.htm?SessionId=&a=article&ProdNr=HH%5F02074250&p=2782
and here:https://bikers-base.de/-SALE-/Sale-Laufraeder-Co-/Sale-Naben-Zubehoer/KHE-Astern-Freecoaster-BMX-Driver-9T-RHD.htm?SessionId=&a=article&ProdNr=HH%5F02074235&p=2782I have a Federal V2 and I bought the 9T version mentioned above. It looks the same as the original Federal one.The early Reverse and Federal V1 had 15 mm inner diameter of the driver bearings, later Reverse ACB and Federal V2 had 14 mm. Keep an eye on this. But in the end this only affects the bearing and the axle, so the drive should still be compatible.I do not know about the Geisha version because I never had one. Astern, Reverse, Federal,... are basically the same, it only depends on what year it is from (as stated above).I am almost sure the ones from the links should work.