Author Topic: igi - Microphone Pegs  (Read 7779 times)

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
igi - Microphone Pegs
« on: September 20, 2014, 04:17:19 PM »
Dub's new Microphone pegs will be available in a couple of months.

What do you think?

http://www.global-flat.com/parts/part/1874


Offline MAYTRICKS

  • Backpacker
  • ******
  • Posts: 293
Re: igi - Microphone Pegs
« Reply #1 on: September 20, 2014, 08:14:26 PM »

I think think they were very well thought out. I'd like to see what they look like mounted on a bike but, I would get them for the 7075 ends and what looks to be rubber griptape like the ones used on the legendary Sequence pegs. Good stuff Dub.

Offline letsgo

  • Backpacker
  • ******
  • Posts: 398
    • Ketch Bikes
Re: igi - Microphone Pegs
« Reply #2 on: September 21, 2014, 01:40:39 AM »
kind of reminds me of Yo! pegs
http://bmxmuseum.com/forsale/p1050548_lg.jpg

Offline byke

  • Backpacker
  • ******
  • Posts: 293
Re: igi - Microphone Pegs
« Reply #3 on: September 21, 2014, 09:54:55 AM »
Or Dieter L (KHE) pegs ...... or Tioga Rollons .... or Schwinn YO .... or Peregrine freestyle pegs ..... or Haro Ground master pegs ..... and so on (I think even love goat had a similar peg out?)

Offline Flatism®

  • GF Inhabitant
  • ********
  • Posts: 2478
    • Flatism
Re: igi - Microphone Pegs
« Reply #4 on: September 21, 2014, 11:23:58 AM »
call me vain & shallow, but I just can't see them looking right on my whip. I'm sure they'd work a treat though!
Props to Dub for pushing practical Flatland specific parts!!
« Last Edit: September 21, 2014, 11:26:53 AM by Flatism® »
Flat-ism

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #5 on: March 18, 2015, 05:05:50 PM »
replacement caps and extenders now available!

see details: http://www.global-flat.com/parts/part/1931



Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #6 on: March 18, 2015, 05:15:37 PM »
and also, TI studs for Geisha hubs - http://www.global-flat.com/parts/part/1930



Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #7 on: January 14, 2017, 12:01:20 AM »
New colors for 2017:




Offline jsteady

  • GF Inhabitant
  • ********
  • Posts: 1578
    • :P
Re: igi - Microphone Pegs
« Reply #8 on: January 14, 2017, 03:53:04 AM »
Those blue are HAWT!!!

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #9 on: January 14, 2017, 01:42:24 PM »
Quote from: IGI
The and + pegs on @takukasa 's bike! Now sing us a song! Hehehe that blue looking fresh tho!! Info@igibmx.com for sales and distro! Get in touch!

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #10 on: April 24, 2022, 03:53:27 PM »
IGI are always updating there pegs, the lastest batch now comes with engraved logos on the caps.

Quote from:  igiflatbmx
Next batch has a new cap design with IGI logos engraved on them! Looking forwards to showing you the updates shortly Stay tuned!

Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1969
Re: igi - Microphone Pegs
« Reply #11 on: April 26, 2022, 04:11:57 AM »
Nice! but the nylon plastic ends are the way to go
Dax (now in LAS VEGAS as of July 2022)

Offline mtbmonkey

  • Forkglider
  • ***
  • Posts: 33
Re: igi - Microphone Pegs
« Reply #12 on: June 15, 2022, 07:52:19 AM »
Can you find the plastic end any longer? 

Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1969
Re: igi - Microphone Pegs
« Reply #13 on: June 15, 2022, 12:37:42 PM »
Can you find the plastic end any longer? 

I don’t follow….so they are the same length as the metal ends. iGi now have a short version if that is what you’re asking
Dax (now in LAS VEGAS as of July 2022)

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: igi - Microphone Pegs
« Reply #14 on: June 20, 2022, 09:27:55 PM »
Quote from: IGI
➕NEW addition to the IGI peg options, 🔥the Peg Cap Extenders!🔥 Still ride the original pegs? Add the spacer to widen the ball and/or even more useful especially if you have a female hub and don't have enough axle for the 10mm peg extenders you can now do 5mm at the bottom of the peg and 5mm at the cap! Mix and match colors for awesome looking results and contrasts!!! 😼😼😼
.
🔧SPECS BELOW :
🔹️16 grams a pair
🔹️Available in Black or Silver
🔹️Compatible to all IGI pegs.
🔹️CAD16.99$ or US12.99$ a pair
.
💡Idea from Will Redd at @londonbikes