Author Topic: Standard Bykes flatland frame!  (Read 72619 times)

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #120 on: October 24, 2018, 10:17:07 PM »
Quote from: @standardbykecompany
Clear over raw always looks so good! 250L frame, fork with brake mounts, and 4 pc bars will make a real nice set up!

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #121 on: October 24, 2018, 10:21:50 PM »
Quote from: @standardbykecompany
We think the young racers should have cool bikes too! Here is a 20” TT Expert XL 100R! Yellow to Super Chrome powder fade. Cool to see 990 mounts on a little guy race frame!

Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1968
Re: Standard Bykes flatland frame!
« Reply #122 on: October 24, 2018, 10:41:08 PM »
Nice work!
Dax (now in LAS VEGAS as of July 2022)

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #123 on: December 08, 2018, 12:35:18 PM »
Quote from: Standardbykecompany
Here is a modern take on one of our original frame models, the Lenghty! This is raw and uncleaned. This bad boy will be powder coated trans purple. More photos will be posted after powder!

Offline bmxelement90

  • Backpacker
  • ******
  • Posts: 238
Re: Standard Bykes flatland frame!
« Reply #124 on: December 11, 2018, 05:01:27 PM »
standard is the only company that riders should support. change my mind

Offline Revig

  • Cliffhanger
  • *******
  • Posts: 446
Re: Standard Bykes flatland frame!
« Reply #125 on: December 11, 2018, 05:37:54 PM »


welcome to the jungle

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #126 on: February 16, 2019, 02:11:29 AM »
Quote from: standardbykecompany
Here is another very cool custom fresh out of the @schwarz_pc oven in Tropical Breeze! This Resinator frame has a 19.5” front end and our classic gusset! It also has traditional cable routing rather than the stock routing through the seat tube. One other very cool feature is the wrap around seat stay gusset with a weld on S-logo! We love builds like this!

Offline sbroflatland

  • Cliffhanger
  • *******
  • Posts: 622
  • ga_goosh
Re: Standard Bykes flatland frame!
« Reply #127 on: February 28, 2019, 10:51:02 PM »
sounds very close to the geometry of my mankind alive frame with a higher step over height. i like the removable mounts.  my mk doesnt have that option.

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #128 on: March 05, 2019, 12:58:10 PM »
Quote from: standardbykecompany
Here are a few bits of hotness from around the shop!

Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1831
Re: Standard Bykes flatland frame!
« Reply #129 on: March 05, 2019, 02:50:19 PM »
is this custom?
price?
looks good

Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1968
Re: Standard Bykes flatland frame!
« Reply #130 on: March 05, 2019, 03:11:00 PM »
Nice! rather odd back end design tho
Also the dropouts could be milled about a half inch further in
Dax (now in LAS VEGAS as of July 2022)

Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: Standard Bykes flatland frame!
« Reply #131 on: March 06, 2019, 11:34:12 PM »
The flatland frames are all custom made so you can spec them out as you like.

Offline a08

  • Backpacker
  • ******
  • Posts: 318
Re: Standard Bykes flatland frame!
« Reply #132 on: April 20, 2019, 01:48:56 AM »
19.25"/19.5" with a 13" Back end would sell like hot cakes!
Id buy one of those hot cakes. especially if they gave it a tao head tube junction

Nice! rather odd back end design tho
Also the dropouts could be milled about a half inch further in
odd like how? looks like an STA 500 a the ST/SS/TT junction.

Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1968
Re: Standard Bykes flatland frame!
« Reply #133 on: April 20, 2019, 09:05:07 PM »
19.25"/19.5" with a 13" Back end would sell like hot cakes!
Id buy one of those hot cakes. especially if they gave it a tao head tube junction

Nice! rather odd back end design tho
Also the dropouts could be milled about a half inch further in
odd like how? looks like an STA 500 a the ST/SS/TT junction.

Yeah something with a throwback design would pique folks’ interests bigtime.

As far as the backend goes guess I just hadn’t seen any older standard frames with that. More used to the newer STA backends I guess 
Dax (now in LAS VEGAS as of July 2022)

Offline a08

  • Backpacker
  • ******
  • Posts: 318
Re: Standard Bykes flatland frame!
« Reply #134 on: April 20, 2019, 09:15:19 PM »
Oh I see, I had to take a second look. I actually agree on second thought. Looks better with the SSs piercing the top tube instead of the seat tube below..

Always been a big Standard Fan. Used to have a custom 250L with the outline of Ohio lasered into the seat stay brace but it got stolen.