Author Topic: PiR products part(s) gallery  (Read 212512 times)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #300 on: July 18, 2013, 06:59:53 PM »
PiR custom flatland frame
 Modernized Dividual Southbank replica
 
 TT = 19.125"
 CS = 13.375" centered
 HA = 75°
 SA = 69°
 Standover = 8.35"
 BB height = 11.75" / +1.75"
 Welded gyro tabs, brakemounts and cable stop
 117 mm long headtube
 MID BB
 Platform
 Swaged & pressed CS and SS
 0.250" thick custom dropouts for 14 mm axle slot
 Double Wishbone with custom "ZJD" cutout on the lower whishbone's cap
 Weight : 3080 g


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline out~riding

  • Global Team
  • GF Inhabitant
  • ******
  • Posts: 3659
Re: PiR products part(s) gallery
« Reply #301 on: July 18, 2013, 11:58:52 PM »
Nice work! Those dropouts do look a bit strange on that frame... modern concessions

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #302 on: July 19, 2013, 12:17:18 PM »
Quote
Nice work! Those dropouts do look a bit strange on that frame... modern concessions

Thanks, that frame was really complex to do, especially because of the platform...

Concerning the dropouts, personnaly I prefer them, compared to the huge dropouts mid school frames used to have. The customer designed the dropouts shape. They remind me the dropouts of the OG Kung Fu...

I have a very nice modernized Morales frame in the making. Stay tunned...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline metalbmxer

  • GF Inhabitant
  • ********
  • Posts: 1968
Re: PiR products part(s) gallery
« Reply #303 on: July 21, 2013, 06:54:45 PM »
Beautiful work, thanks for the updates!
Dax (now in LAS VEGAS as of July 2022)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #304 on: July 24, 2013, 06:23:44 PM »
PiR custom flatland frame

 X shape
 TT = 19.2"
 CS = 12.15" slammed
 HA = 74.5°
 SA = 72.5°
 Standover = 5"
 BB height = 13.3"
 100 mm long headtube
 Spanish BB
 Swaged & flatened CS and SS with extra bend on the drive side, to optimize the chain clearance
 0.19" thick laser cutted dropouts for 3/8" mm axle slot
 Weight : 1780 g

 


PiR custom flatland bar :

Height : 9.5"/241 mm
Width : 25.25" / 641 mm
Upsweep : 3°
No Backsweep
Weight : 900 g



The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #305 on: July 27, 2013, 01:34:19 PM »
PiR custom flatland frame
 TT = 18.9"
 CS = 12.8" slamed
 HA = 74.5°
 SA = 72.5°
 Standover = 6.22"
 BB height = 12.5"
 110 mm long headtube with custom machining
 Spanish BB with internally and externally machining
 Swaged & pressed CS and SS
 Externally machined seat tube
 New shortened 0.19" thick laser cutted dropouts for 3/8" axle
 Integrated chain tensioner on both sides
 Front gusset
Weight : 1750 g


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #306 on: August 07, 2013, 05:12:47 PM »
PiR twin top tube custom flatland frame
 
 Morales replica
 Twin top tube designed
 TT = 19"
 CS = 13.25" slamed
 HA = 75°
 SA = 71°
 Standover = 6.5"
 BB height = 11.42"
 114 mm long headtube with custom "M" (for Morales) cutout and removable gyro tabs
 Double cable stop and welded brakemounts
 Special U bend for the CS
 Externally machined seat tube
 Mid BB
 Rectangular lower wishbone with the same cutout than on the head tube
 Swaged & bullet tipped CS and SS
 0.19" thick laser cutted dropouts
 Integrated chain tensionner on both side
 Weight : 2300 g



The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline HighLander

  • Deathtrucker
  • ********
  • Posts: 764
Re: PiR products part(s) gallery
« Reply #307 on: August 07, 2013, 08:38:10 PM »
PiR twin top tube custom flatland frame
 
 Morales replica
 Twin top tube designed
 TT = 19"
 CS = 13.25" slamed
 HA = 75°
 SA = 71°
 Standover = 6.5"
 BB height = 11.42"
 114 mm long headtube with custom "M" (for Morales) cutout and removable gyro tabs
 Double cable stop and welded brakemounts
 Special U bend for the CS
 Externally machined seat tube
 Mid BB
 Rectangular lower wishbone with the same cutout than on the head tube
 Swaged & bullet tipped CS and SS
 0.19" thick laser cutted dropouts
 Integrated chain tensionner on both side
 Weight : 2300 g






This is a Great twin tt frame!!
One Last Ride.

Offline azflatlander

  • Backpacker
  • ******
  • Posts: 227
Re: PiR products part(s) gallery
« Reply #308 on: August 08, 2013, 02:41:49 AM »
Awesome work!  :beer:

What size Sprocket would you have to use for complete clearance with those chainstays  ::)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #309 on: August 08, 2013, 08:27:58 PM »
Quote
Awesome work!  :beer:

What size Sprocket would you have to use for complete clearance with those chainstays  ::)


Thanks !

You can run a 18T up to 25 T sprocket with that frame. Probably less and more too, but not sure...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #310 on: August 18, 2013, 02:03:32 AM »
The modernized South bank replica, previously shown, built up :


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #311 on: August 28, 2013, 06:45:20 PM »
Not really flatland related but here's a custom frame for a designer project of an electric bicycle, built with BMX parts.
Pictures of the complete bike later...



The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #312 on: September 05, 2013, 10:06:43 AM »
PiR custom bar
Lighter Peregrine Q bar 1.5 replica

Specifications :

Height : 9"/228 mm
Width : 28" / 711 mm
Upsweep : 6°
Backsweep : 6°
Holes in grip tubes to save weight
Weight : 795 g



The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Phatman

  • Guest
Re: PiR products part(s) gallery
« Reply #313 on: October 07, 2013, 02:29:04 PM »
Nothing new to report Malo?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #314 on: October 22, 2013, 12:13:17 PM »
Quote
Nothing new to report Malo?


As usual, summer is not a very good period...

Anyway there's a lots of new things to come in the futur...

Some updates :

PiR custom frame



PiR custom frame & fork



PiR custom frame



PiR custom bar stem combo


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com