Author Topic: PiR products part(s) gallery  (Read 138431 times)

Offline indyBarber73

  • Cliffhanger
  • *******
  • Posts: 573
Re: PiR products part(s) gallery
« Reply #240 on: March 11, 2013, 01:42:19 AM »
I have been riding the sh*t out of these forks for a couple weeks strong now and Malo has done a wonderful job on these no complaints what so ever,everything feels amazing brakes work superior and they have that modern touch as well. Thank you again Malo!

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #241 on: March 16, 2013, 03:28:11 PM »
Revised Swiss Miss style bar stem combo for flat/street riding

Specs :

Rise (from middle of the stem to grip axis) : 9"/228 mm
Width : 27"/685 mm
Back sweep : 6
Up sweep : 2
1.97"/50 mm height stem
Custom M8 binders
Hollow M8 bolts
Stem reach : 1.22"/31 mm
Total offset : 1.49"/38 mm
Additionnal holes in grip tubes to save weight
Weight : 960 g





Quote
I have been riding the sh*t out of these forks for a couple weeks strong now and Malo has done a wonderful job on these no complaints what so ever,everything feels amazing brakes work superior and they have that modern touch as well. Thank you again Malo!


It has not been easy, but the result is very nice and that's the most important.
Thanks a lot for the good comments Chris !

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #242 on: March 18, 2013, 09:43:11 AM »
PiR custom frame & handlebar :



PiR custom frame :


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #243 on: March 22, 2013, 10:35:00 AM »
Modernized GT Show

TT = 19.3"
CS = 12.8" slammed
HA = 75
SA = 71
Standover = 5"
BB height = 12.5" / +2.75"
90 mm long headtube
Spanish BB
Swaged & pressed CS and SS
Externally machined seat tube
PiR signature dropouts 0.19" thick laser cutted for 3/8" axle
Weight : 1890 g




The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline JUGGARNAUT

  • GF Inhabitant
  • ********
  • Posts: 6555
Re: PiR products part(s) gallery
« Reply #244 on: March 22, 2013, 03:52:30 PM »
SICK, what would this cost done as a +4?  (24" Frame) with mounts and tabs, mid BB.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #245 on: March 23, 2013, 01:04:57 PM »
Quote
SICK, what would this cost done as a +4?  (24" Frame) with mounts and tabs, mid BB.

Hi Karl, that frame raw (without paint) for 24" wheels would cost 450 Euros (410 Euros with rear tubes like S&M Intrikat) + 30 Euros for mounts & tabs +50 Euros if painted or clearcoated.

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1777
Re: PiR products part(s) gallery
« Reply #246 on: March 23, 2013, 02:01:51 PM »
That show frame is piece of art..

Offline JUGGARNAUT

  • GF Inhabitant
  • ********
  • Posts: 6555
Re: PiR products part(s) gallery
« Reply #247 on: March 23, 2013, 03:23:41 PM »
Quote
SICK, what would this cost done as a +4?  (24" Frame) with mounts and tabs, mid BB.

Hi Karl, that frame raw (without paint) for 24" wheels would cost 450 Euros (410 Euros with rear tubes like S&M Intrikat) + 30 Euros for mounts & tabs +50 Euros if painted or clearcoated.


Thank you, but who's Karl..?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #248 on: March 23, 2013, 03:51:26 PM »
Oh sorry I mistake you and Paradoxium...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline TRUTH1970

  • Backpacker
  • ******
  • Posts: 268
Re: PiR products part(s) gallery
« Reply #249 on: March 23, 2013, 06:40:00 PM »
the show frame looks so good, Malo should be very proud, on a side note my custom flat forks are amazing such good quality ( if anyone is thinking of getting Malo to make them a part -they should you wont be dissapointed),had a good week of being on them but now snow and crazy cold winds have given me sinus / ear ache and now all i can do i look at my bike.

Offline JUGGARNAUT

  • GF Inhabitant
  • ********
  • Posts: 6555
Re: PiR products part(s) gallery
« Reply #250 on: March 24, 2013, 05:09:50 AM »
Oh sorry I mistake you and Paradoxium...
No Problem, I've watched your Work getting better and better over these years, so I am Interested, just give me a bit to get use to this bigger ride I just got and then I'm in. The fact that Mark gives you such Great reviews tells me and I'm sure Alot of other guys on here you know what you're doin. I've never read a Single bad review of your Products. I WILL be in Touch.

                     Doug

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #251 on: March 26, 2013, 10:18:30 AM »
Thanks for all the good words !

Last update :

PiR custom flatland frame
 Modernized Dividual Cold Embrace replica
 
 TT = 19.25"
 CS = 12.8" slammed
 HA = 75
 SA = 71.5
 Standover = 7.88"
 BB height = 11.75" / +1.75"
 Welded gyro tabs, brakemounts and cable stop
 Holes for internal cable routine with reinforcements on top tube
 Integrated seat post clamp
 117 mm long headtube
 Spanish BB
 Swaged & pressed CS and SS
 Externally machined seat tube
 0.19" thick laser cutted PiR signature dropouts for
 14 mm axle slot
 Integrated chain tensioner on both sides
 Weight : 1900 g





PiR custom street frame
 
 TT = 21"
 CS = 13.6" slammed
 HA = 74.5
 SA = 71
 Standover = 8.55"
 BB height = 11.5" / +1.06"
 117 mm long headtube with special head badge
 Mid BB
 Swaged & bullet tipped CS and SS
 Externally machined seat tube
 Integrated seat post clamp
 0.19" thick laser cutted dropouts
 14 mm axle slot
 Front gusset on TT & DT
 Weight : 2200 g




The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline houdini

  • Forkglider
  • ***
  • Posts: 45
Re: PiR products part(s) gallery
« Reply #252 on: March 26, 2013, 03:21:34 PM »
Malo is the BEST! PERIOD! Email sent buddy.

Offline Bri-jon

  • Cliffhanger
  • *******
  • Posts: 517
Re: PiR products part(s) gallery
« Reply #253 on: March 26, 2013, 09:55:55 PM »
I was wondering when you would do something like hidden cables.
"sh*t + talkers = stalkers lol"

Sold my bike to emigrate to Canada and still waiting for a Visa to work. Worst mistake EVER!

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #254 on: March 29, 2013, 04:46:22 PM »
PiR custom bar stem combo
 
 Specs :
 
 Height : 8"/203 mm
 Width : 24" / 610 mm
 Upsweep : 1
 No backsweep
 Zero Offset
 Weight : 790 g
 


 

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com