Author Topic: PiR products part(s) gallery  (Read 147196 times)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #180 on: October 31, 2012, 09:49:03 AM »
PiR custom flatland bar (for Alain Massabova)

Specs :

Height : 8"/204 mm
Width : 25" / 635 mm
No Upsweep
No Backsweep
Holes in griptubes to save weight
3/4" cross bar
Special cutouts at the bottom
Weight : 650 g





« Last Edit: October 31, 2012, 11:20:53 AM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #181 on: October 31, 2012, 10:57:54 AM »
PiR custom flatland frame
 
 TT = 19"
 CS = 12.7" slamed
 HA = 74.5
 SA = 74
 Standover = 5.75"
 BB height = 12.9" / +3.17"
 100 mm long headtube with custom machining
 Spanish BB with internally and externally machining
 Swaged & pressed CS and SS
 Externally machined seat tube
 New shortened 0.19" thick laser cutted dropouts for 3/8" axle
 New Integrated chain tensioner on both sides
 Front gusset
 Weight : 1570 g
 
 




The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


byke

  • Guest
Re: PiR products part(s) gallery
« Reply #182 on: October 31, 2012, 11:17:53 AM »
I love the reference in the BB to Chris Bohm's love of "Quality street". ;)
Loverly work Malo ....


« Last Edit: October 31, 2012, 04:10:22 PM by byke »

Offline TRUTH1970

  • Backpacker
  • ******
  • Posts: 269
Re: PiR products part(s) gallery
« Reply #183 on: November 02, 2012, 04:25:37 PM »
i have got to get a  bars made by this guy( im sick of 2pc bars) -any feed back on quality etc?

byke

  • Guest
Re: PiR products part(s) gallery
« Reply #184 on: November 02, 2012, 04:27:21 PM »
I like my 2 frames, pegs, seat post, and bars he has made me.
And have kept going back for more stuff .... So judge as you will.
« Last Edit: November 02, 2012, 04:57:53 PM by byke »

Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1796
Re: PiR products part(s) gallery
« Reply #185 on: November 02, 2012, 04:54:46 PM »
my bars is perfect.
now i ll make a new frame.
« Last Edit: November 02, 2012, 05:08:32 PM by sakis »

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #186 on: November 06, 2012, 01:30:53 PM »
Custom pegs
 
 Specs. :
 
 6061-T6 Alloy
 30.5 mm diameter
 105mm length
 Grip tape only
 Rounded extremity
 fits 10mm axles (3/8")
 170 g per pair


 
« Last Edit: December 14, 2012, 01:29:53 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #187 on: November 13, 2012, 03:39:31 PM »
PiR custom bar stem combo
 
 Specs :
 
 Height : 8.75"/222 mm
 Width : 24.4" / 620 mm
 Upsweep : 2
 No backsweep
Zero Offset
Weight : 780 g






The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #188 on: November 15, 2012, 01:16:00 PM »
PiR custom flatland frame
 
 TT = 19"
 CS = 12.82" slamed
 HA = 74.6
 SA = 71.5
 Standover = 6"
 BB height = 12.1" / +2.26"
 117 mm long headtube
 Mid BB
 Wishbone on CS
 Swaged & bullet tipped CS and SS
 Integrated seat post clamp
 0.19" thick laser cutted dropouts
 Integrated chain tensionner on both side
 Removable brake mounts, gyro tabs and cable stop
 Weight : 2080 g





The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline DaddyCool

  • Deathtrucker
  • ********
  • Posts: 741
Re: PiR products part(s) gallery
« Reply #189 on: November 15, 2012, 10:54:19 PM »
Hi Malo,
this is frame is very close to what I am interested in. From all your frames I have seen I like this one the most.
It is very likely that I will ask you for a frame one day, maybe next year...

Offline K.Wong

  • GF Inhabitant
  • ********
  • Posts: 1344
Re: PiR products part(s) gallery
« Reply #190 on: November 16, 2012, 08:41:25 AM »
whoa, that last frame is beautiful... like a modernize tao or jps... luving it, except for the weight.

Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1796
Re: PiR products part(s) gallery
« Reply #191 on: November 16, 2012, 10:04:40 AM »
whoa, that last frame is beautiful... like a modernize tao or jps... luving it, except for the weight.
well.
This frame has more attention to strength and space.
1)the frame has not machined seatpost tube so it will not flex
2)the front tubes are 34.9 mm so bigger diameter than the normal/most frames today and are stronger
3)the down tube and gusset tube are 0.049'' thickness so they are much stronger..
4)this way i could easily lift the dt at the bb area a little bit without weakening the frame and make the top tube lower at the seatpost area without sacrificing much strength.
5)also the back end had a 0.049'' 32 mm wishbone and 7/8 0.049'' bridge tube.
the frame could be much lower of course without the brake mounts around 80 gr lower or less
so the first frame on the computer program was 1850 and it can get even lower without being weak,but i wanted to be super strong so i made it heavier..
i also made a handlebar from malo 2-3 months ago and i am very happy with it.
 so since my intrikat frame was long for me 19.5" i thought to make a new smaller and spacier frame with a front end like the tao..
thanks malo great work,i cant wait to ride it..
« Last Edit: December 07, 2013, 11:48:18 AM by sakis »

Offline kabirun

  • GF Inhabitant
  • ********
  • Posts: 1206
Re: PiR products part(s) gallery
« Reply #192 on: November 16, 2012, 12:48:47 PM »
This frame is really nice!!


 :beer: :beer: :beer:

Offline K.Wong

  • GF Inhabitant
  • ********
  • Posts: 1344
Re: PiR products part(s) gallery
« Reply #193 on: November 18, 2012, 06:33:18 AM »
whoa, that last frame is beautiful... like a modernize tao or jps... luving it, except for the weight.
well.
This frame has more attention to strength and space.
1)the frame has not machined seatpost tube so it will not flex
2)the front tubes are 34.9 mm so bigger diameter than the normal/most frames today and are stronger
3)the down tube and gusset tube are 0.049'' thickness so they are much stronger..
4)this way i could easily lift the dt at the bb area a little bit without weakening the frame and make the top tube lower at the seatpost area without sacrificing much strength.
5)also the back end had a 0.049'' 32 mm wishbone and 7/8 0.049'' bridge tube.
the frame could be much lower of course without the brake mounts around 80 gr lower or less
so the first frame was 1850 and it can get even lower without being weak,but i wanted to be super strong so i made it heavier..
i also made a handlebar from malo 2-3 months ago and i am very happy with it.
 so since my intrikat frame was long for me 19.5" i thought to make a new smaller and spacier frame with a front end like the tao..
thanks malo great work,i cant wait to ride it..


thanks for the input, it's great being able to place a name to a real beauty of a frame.
all the best and post pixs!

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 314
  • Innovative products
Re: PiR products part(s) gallery
« Reply #194 on: November 19, 2012, 02:30:43 PM »
Pic of the previous custom bar stem combo...

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com