Author Topic: PiR products part(s) gallery  (Read 137828 times)

Offline kabirun

  • GF Inhabitant
  • ********
  • Posts: 1206
Re: PiR products part(s) gallery
« Reply #150 on: July 22, 2012, 09:00:30 PM »
those bars look amazing!!!


Byke, when you have a chance can you please explain the headset system? -- looks very interesting.

Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #151 on: July 24, 2012, 12:19:34 PM »
PiR custom fork
 PiR signature dropouts connexion
 One piece CNC steer tube with brake cable clearance
 0.190" thick laser cut dropouts
 Pressed legs
 Zero Offset
 3/8" Dropouts
 Removeable brake mounts
 Built in race for integrated headsets
 175 mm steer tube externally machined to save weight
 800 g




The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com

Offline TRUTH1970

  • Backpacker
  • ******
  • Posts: 268
Re: PiR products part(s) gallery
« Reply #152 on: July 24, 2012, 06:17:42 PM »
Byke that is one crazy frame, props to you and Malo. not sure if i could ride it but makes me want to get a frame done by Malo ( i was about to get a custom s&m intrikat) got cash ready but now im thinking should i get a full custom done ?

byke

  • Guest
Re: PiR products part(s) gallery
« Reply #153 on: July 24, 2012, 06:42:11 PM »
Byke, when you have a chance can you please explain the headset system? -- looks very interesting.

Basically, since a head tube generally flares at each end its not possible to piece a tube as the connection wouldn't fit.

So The lower cup is built in to the head tube .... where as the upper cup is a press in (still a normal integrated headset)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #154 on: September 07, 2012, 04:39:33 PM »
Flatland frame

TT = 18.8"
CS = 12.7" slamed
HA = 74.5
SA = 73
Standover = 5.35"
BB height = 13" / +3.28"
100 mm long headtube with custom machining
Spanish BB with internally and externally machining
Swaged & pressed CS and SS
Externally machined seat tube
New shortened 0.19" thick laser cutted dropouts for 3/8" axle
Integrated chain tensioner on both sides
Front gusset
Weight : 1530 g




Flatland frame

TT = 19.4"
CS = 12.8" slamed
HA = 72.5
SA = 72
Standover = 5.5"
BB height = 13.2" / +3.46"
110 mm long headtube with custom machining
Spanish BB with internally and externally machining
Swaged & pressed CS and SS
PiR signature dropouts connexion
Integrated chain tensioner on both sides
Weight : 1780 g




Flatland bar

Specifications :

Height : 8"/203 mm
Width : 23" / 584 mm
Upsweep : 5
No Backsweep
Weight : 865 g



Flatland bar

Strong 4 pieces design

Specifications :

Height : 9.15"/232 mm
Width : 25.8" / 655 mm
Upsweep : 3
Backsweep : 7
Weight : 950 g

« Last Edit: September 07, 2012, 09:49:41 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1777
Re: PiR products part(s) gallery
« Reply #155 on: September 09, 2012, 08:08:49 AM »
here are the pics malo,The bars are fantastic.
malo is doing great job and he designed every detail as we agreed.








Offline flatlanderic

  • Backpacker
  • ******
  • Posts: 233
Re: PiR products part(s) gallery
« Reply #156 on: September 10, 2012, 12:29:55 AM »
looks damn good Sakis!

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #157 on: September 12, 2012, 02:55:30 PM »
New custom fork :

PiR signature dropouts connexion
 One piece CNC steer tube
 New 0.190" thick laser cut dropouts
 Pressed legs
 Zero Offset
 3/8" Dropouts
 Built in race for integrated headsets
 165 mm steer tube externally machined to save weight
 820 g


The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1777
Re: PiR products part(s) gallery
« Reply #158 on: September 12, 2012, 06:10:57 PM »
double butted steer tube?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #159 on: September 12, 2012, 06:47:16 PM »
Quote
double butted steer tube?

Just externally machined...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline sakis

  • GF Inhabitant
  • ********
  • Posts: 1777
Re: PiR products part(s) gallery
« Reply #160 on: September 12, 2012, 07:28:27 PM »
Quote
double butted steer tube?

Just externally machined...
i know,i was just kidding..you can anwser me at the other email when you find some time..thanks .kind regards

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #161 on: September 19, 2012, 02:38:30 PM »
Small update...

Flatland bar
 
 Specs :
 
 Height : 8"/203 mm
 Width : 23" / 584 mm
 Upsweep : 5
 No Backsweep
 Weight : 865 g






PiR custom frame
 
 Specs. :
 
 Top Tube : 19.2"
 CS : 12.15"
 Head angle : 74.5
 Seat angle : 72.5
 BB Height : +3.45"
 Elevated CS/BB connexion
 100 mm long headtube
 Euro BB
 Swaged & tapered rear tubes
 1800 g





For those who haven't seen it yet (more info here : http://www.global-flat.com/smf/index.php?topic=53681.0 ) :



And Eric's complete bike (with PiR frame) :

« Last Edit: September 19, 2012, 09:17:37 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline kabirun

  • GF Inhabitant
  • ********
  • Posts: 1206
Re: PiR products part(s) gallery
« Reply #162 on: September 20, 2012, 05:37:40 AM »
Small update...

Flatland bar
 
 Specs :
 
 Height : 8"/203 mm
 Width : 23" / 584 mm
 Upsweep : 5
 No Backsweep
 Weight : 865 g






really nice design. I feel this would have been a quamen classic, but Zenta never though about it....

Malo, you should really go into producing some alloy parts (stems, bar ends, sprockets and pegs)

cheers

K


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 309
  • Innovative products
Re: PiR products part(s) gallery
« Reply #163 on: September 25, 2012, 03:40:21 AM »
For those who could be interested by a fork, here's a detailed description :

« Last Edit: September 25, 2012, 04:22:16 AM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline OldYeller

  • Cliffhanger
  • *******
  • Posts: 465
Re: PiR products part(s) gallery
« Reply #164 on: September 25, 2012, 05:55:39 AM »
Pretty cool design.


I'd say that's probably the worst possible place to lose weight though.  The part you machined away is were most forks bend assuming the legs hold.  I've bent plenty over about 30 years, trust me.


If anything, machine out the inside of the top of the headtube.  You could probably get by with it pretty thin, you've just got side impacts from the bars hitting the ground with very little weight on them.


If you absolutely have to do it at the bottom, do it on the inside so the larger outer diameter can help strengthen it.