Author Topic: PiR products part(s) gallery  (Read 212524 times)


Offline 2flat2furious

  • GF Inhabitant
  • ********
  • Posts: 4210
Re: PiR products part(s) gallery
« Reply #76 on: October 12, 2011, 04:00:45 AM »
Wondering what company's like ares say of those copy's?

every time you say something like this i want to pinch your cheek and go "dawwwwww"

Offline Wouter van der Linde

  • GF Inhabitant
  • ********
  • Posts: 1780
    • Dutchflatland
Re: PiR products part(s) gallery
« Reply #77 on: October 13, 2011, 12:21:36 PM »
Wondering what company's like ares say of those copy's?

every time you say something like this i want to pinch your cheek and go "dawwwwww"

Hahaha! It was not ment to be hated, I was just wondering what Ares would think about that :P

Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #78 on: November 23, 2011, 02:43:14 PM »
PiR recently suffured of a sad misadventure.
My welder had the tendon of one of this finger cutted.
So he wasn't able to weld anything.
It happened few weeks ago.
Now he can weld again, but there's a lot of late concerning the orders.
Things slowly become normal again, but it really was a hard time for PiR.

Another thing is that the website is down. A new one will be available soon...

Anyway, here are the latest news :

Custom frame :





Custom bars :



Weight : 805 g




Custom frame :



Weight : 1670 g



Stem part of the Burr stem combo prototype (a bolt invisible bar stem combo)  :



Big thanks to people who support the brand !

The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com

Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #79 on: November 24, 2011, 07:10:17 PM »
New fork's dropouts, for traditionnal or female hubs...

The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com

Offline Keneken

  • Backpacker
  • ******
  • Posts: 271
  • im on iron mans back! ,-
Re: PiR products part(s) gallery
« Reply #80 on: November 24, 2011, 07:22:34 PM »
very nice work wish i could afford a frame  ::)
how much would it be for something like one of these shipped to uk?









amazing work! :beer: :beer: :beer:
''let me tell ya something i did a front n rear wheel hang on the cloping on the slide of the spine, now i stick to street!''

''do you freestyle?''

However serious you take it general public sees us as just dicking about on 'kids' bikes, some people could do to remember that and smile a little.

Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #81 on: November 24, 2011, 07:42:20 PM »
Quote
how much would it be for something like one of these shipped to uk?


100 Euros raw (without paint), 115 Euros painted and 17 Euros for shipping.


Spy pic of the new revised Moebius stem :








The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com

Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #82 on: December 05, 2011, 07:48:28 PM »
Few months ago, I created a topic concerning the restoration and the modification of a Skyway TA frame.
Unfortunately I had to delete it because the customer didn't want to show it until it was finished.
Now that it's finished (almost) I have the permission to share with you the result.

Personnaly I had to modify the frame, so that the original frame (in red), becomes the white frame in the following picture.





Please have a look to the following link and you'll understand all the work needed to reach this really nice result...

http://bmxmuseum.com/forums/viewtopic.php?id=378246
« Last Edit: December 19, 2011, 11:35:08 AM by Malo »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com

Offline manu

  • Hitchhiker
  • *****
  • Posts: 161
Re: PiR products part(s) gallery
« Reply #83 on: December 06, 2011, 08:59:59 AM »
Malo doin' it for the kids.
Nicely done, another project you can be proud of!

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #84 on: December 19, 2011, 11:39:52 AM »
Quote
Nicely done, another project you can be proud of!


Thank you ! :beer:
--------------------------------------------------------------------------------------------------------------------

New custom frame :

Top Tube : 20"
Head angle : 75°
Seat angle : 71°
Chain stay : 13" centered
BB Height : +2.56"
117 mm long headtube with custom machining
Integrated seat post clamp
Spanish BB with custom machining
Externally machined seat tube
Integrated chain tensionner
Swaged & tapered rear tubes
Lower gusset
1685 g


« Last Edit: December 19, 2011, 11:53:55 AM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline Lam47

  • Cliffhanger
  • *******
  • Posts: 434
Re: PiR products part(s) gallery
« Reply #85 on: December 19, 2011, 09:53:03 PM »
That's lovely! How much and where?
Xbox live GT. Mr Brownground

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 323
  • Innovative products
Re: PiR products part(s) gallery
« Reply #86 on: December 20, 2011, 11:19:47 AM »
Quote
That's lovely! How much and where?

Thank you.
The price is around 380 Euros + shipping.
The only way to get PiR stuff is to contact me, using the following adress :

pir.bmx@gmail.com
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline DennyFlatlandBMX

  • Deathtrucker
  • ********
  • Posts: 702
Re: PiR products part(s) gallery
« Reply #87 on: December 20, 2011, 05:28:06 PM »
Pir Brand is the FUTURE!!

Offline Flatride

  • Deathtrucker
  • ********
  • Posts: 915
    • Facebook
Re: PiR products part(s) gallery
« Reply #88 on: December 20, 2011, 06:57:50 PM »
Can't wait to receive this bad boy. :D

Quote
Nicely done, another project you can be proud of!


Thank you ! :beer:
--------------------------------------------------------------------------------------------------------------------

New custom frame :

Top Tube : 20"
Head angle : 75°
Seat angle : 71°
Chain stay : 13" centered
BB Height : +2.56"
117 mm long headtube with custom machining
Integrated seat post clamp
Spanish BB with custom machining
Externally machined seat tube
Integrated chain tensionner
Swaged & tapered rear tubes
Lower gusset
1685 g




Offline Malo

  • Backpacker
  • ******
  • Posts: 229
Re: PiR products part(s) gallery
« Reply #89 on: December 26, 2011, 03:45:45 PM »
PiR custom frame...
 

 
PiR custom frame, bar stem combo and forks...
 

 
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo



pir.bmx@gmail.com