Author Topic: PiR products part(s) gallery  (Read 124205 times)

Offline UFO

  • Hitchhiker
  • *****
  • Posts: 175
    • UFOBMX
Re: PiR products part(s) gallery
« Reply #45 on: June 21, 2011, 11:00:05 PM »
I have to write a few words about these forks again.


Malo, I think those forks are one of the most beutiful parts you have ever made.
I have been thinking about them all day.

While they offer a clean and simple style of fork in terms of technology.
They have a shape which I find very pleasing to the eye.
To the point where I could imagine owning a pair not to ride, but just to look at (and i don't even ride zero offset lol)

But I honestly believe if these forks were mass produced by a large name brand in BMX, that in 20 or so years they would become a truly iconic collectors piece.

You really have outdone yourself this time.



Mark



Make sure you put them in a Glass Display. 

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #46 on: June 24, 2011, 09:45:35 AM »
Quote
I have to write a few words about these forks again.


Malo, I think those forks are one of the most beutiful parts you have ever made.
I have been thinking about them all day.

While they offer a clean and simple style of fork in terms of technology.
They have a shape which I find very pleasing to the eye.
To the point where I could imagine owning a pair not to ride, but just to look at (and i don't even ride zero offset lol)

But I honestly believe if these forks were mass produced by a large name brand in BMX, that in 20 or so years they would become a truly iconic collectors piece.

You really have outdone yourself this time.


Thank you Mark !
The funny thing is that I use to make this fork, the same bending die I bought to make your bar stem combo...

Here's the last PiR custom bar :

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline schneider

  • Funky Chicken
  • ****
  • Posts: 71
Re: PiR products part(s) gallery
« Reply #47 on: June 24, 2011, 06:05:39 PM »
HOW MUCH THAT BAR COST?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #48 on: June 24, 2011, 10:04:27 PM »
HOW MUCH THAT BAR COST?

That bar is 100 Euros + shipping with the color of your choice...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline paulbrown692000

  • GF Inhabitant
  • ********
  • Posts: 1256
    • Revelation BMX
Re: PiR products part(s) gallery
« Reply #49 on: June 24, 2011, 10:59:48 PM »
do you make sprockets?
All things in life are temporary. If going well...enjoy it, they will not last forever. If going wrong donít worry, they can't last long either.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #50 on: June 24, 2011, 11:06:32 PM »
do you make sprockets?

Sorry paulbrown692000, I forgot to answer your question the first time you asked...
I'm not really able to make sprocket, even if it's not really impossible. Send me a PM and depending on your design I'll tell you...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline paulbrown692000

  • GF Inhabitant
  • ********
  • Posts: 1256
    • Revelation BMX
Re: PiR products part(s) gallery
« Reply #51 on: June 25, 2011, 02:40:15 AM »
do you make sprockets?

Sorry paulbrown692000, I forgot to answer your question the first time you asked...
I'm not really able to make sprocket, even if it's not really impossible. Send me a PM and depending on your design I'll tell you...
I had some made for street riding but want to make some for flatland too.  I pm you a photo of the street one.
All things in life are temporary. If going well...enjoy it, they will not last forever. If going wrong donít worry, they can't last long either.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #52 on: June 28, 2011, 01:34:47 AM »
PiR in Mexico !

The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #53 on: June 29, 2011, 03:49:21 PM »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: PiR products part(s) gallery
« Reply #54 on: June 29, 2011, 07:29:32 PM »



Please, show me head tube in this frame from inside?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #55 on: June 29, 2011, 08:30:38 PM »
Quote
Please, show me head tube in this frame from inside?

Kamil,

I'll be fair with you.

You probably think you are the inventor of what you call the "Chimera full tubing system" or something like that ?

The answer is : NO, you aren't

If you had more knowledge concerning frame building, you should know that.

Please try to begin to be smarter...
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline ChimeraBikzCom

  • Company
  • Backpacker
  • *****
  • Posts: 369
Re: PiR products part(s) gallery
« Reply #56 on: June 29, 2011, 09:04:10 PM »
Quote
Please, show me head tube in this frame from inside?

Kamil,
Please try to begin to be smarter...


It was a very rude answer to one simple question. So you use the same system. And I know what you mean, but no one use it in bmx frames like we did.

byke

  • Guest
Re: PiR products part(s) gallery
« Reply #57 on: June 29, 2011, 09:10:35 PM »
Actually I know of many companies who have used lug piercing such as basic bikes.
Eitherway, regardless of this method .... What it all comes down to is the finished product meeting the expectations of the customers requests.

It's definitely a lovely looking frame, fork and bar.
Congrats Malo.
« Last Edit: June 30, 2011, 12:25:25 AM by byke »

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 306
  • Innovative products
Re: PiR products part(s) gallery
« Reply #58 on: June 29, 2011, 09:16:41 PM »
Quote
It was a very rude answer to one simple question.

Yes I think that too, but it's like a game between us  -_-

Quote
So you use the same system. And I know what you mean, but no one use it in bmx frames like we did.

I think this "method" is easier, especially for head tube with a big radius and it works well.
The website is down but you can visit my profile on facebook :
https://www.facebook.com/Pir.Malo

If you want a quotation or place an order, just contact me using pir.bmx@gmail.com


Offline Mr. Acid Green

  • Backpacker
  • ******
  • Posts: 393
  • beware of the TROLL.
Re: PiR products part(s) gallery
« Reply #59 on: June 30, 2011, 04:11:24 AM »



please send photos of this one assembled.... lovin it...
please dont set yourself on fire.