Hi,
this is an interesting concept for a fork. Was it your or the customer's idea?
Behind each parts I made, there's a little story.
For this fork, it was a special request for a very good customer and friend who asked me if it was possible to make a "double legs fork". He already ordered a twin cross bar handlebar and DTT frame, and that fork would match the other parts perfectly...
After receiving few sketches from the customer (see pictures attached), I started the CAD work.
After few hours of design, communication and modifications, the final drawing was done...
The final drawing...
Latest PiR custom flatland frame for Chris Böhm
TT = 19.1"
CS = 12.85" slamed
HA = 74.5°
SA = 72°
Standover = 7.48"
BB height = 11.9"
110 mm long headtube with custom "CB" logo cutout
Spanish BB with internally and externally machining
Swaged & pressed CS and SS
Externally machined seat tube
New shortened 0.25" thick laser cutted dropouts for 3/8" axle
Integrated chain tensioner on both sides
Gusset on top & down tube
Weight : 1634 g