Author Topic: PiR products part(s) gallery  (Read 93821 times)

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 291
  • Innovative products
PiR products part(s) gallery
« on: April 14, 2011, 05:10:30 PM »
Custom frame

Custom frame

Custom frame

Custom frame and bar stem combo

Custom bar stem combo

Custom frame

Custom frame, handlebar, sprocket, bar ends and stem

Custom frame

Custom frame, bar stem combo and pegs

Custom frame

Custom frame and bar stem combo

Custom frame

Custom frame

Custom frame

Custom frame

Custom frame and pegs

Custom frame and handlebar

Custom bar stem combo, fork and pegs

Custom bar stem combo

Custom frame

Custom frame

Custom frame

Custom frame and bar stem combo

Custom bar stem combo

Custom frame, bar and stem.

« Last Edit: May 04, 2011, 01:06:24 AM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo

If you want to place an order, just contact me using pir.bmx@gmail.com


Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 291
  • Innovative products
PiR products part(s) galery
« Reply #1 on: May 03, 2011, 03:15:03 PM »
Last custom bar stem combo (a Swiss Miss copy with custom specifications) :

Rise (from bottom of the stem to grip axis) : 8.9"
No back sweep
Up sweep : 2
Reach : 36 mm
Weight : 700 g
Multi tubes design with 5 different thicknesses





Hyperbola bar stem combo :



few more custom frames :







Last custom pegs made, with a machined knurling :



« Last Edit: May 03, 2011, 03:19:35 PM by PiR products »
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo

If you want to place an order, just contact me using pir.bmx@gmail.com


Offline manu

  • Hitchhiker
  • *****
  • Posts: 161
Re: PiR products part(s) galery
« Reply #2 on: May 03, 2011, 05:28:10 PM »
I want those pegs!
All six of them.
Gimme!

Offline robpossible

  • GF Inhabitant
  • ********
  • Posts: 1159
  • Crackpacker to kitchen table
Re: PiR products part(s) galery
« Reply #3 on: May 03, 2011, 06:17:58 PM »
I want those pegs!
All six of them.
Gimme!
Those pegs do look tasty... Whats the specs on those Malo?
Size, weight, material?
1st law of thermodynamics: Energy can not be created or destroyed, it only changes in form.

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 291
  • Innovative products
Re: PiR products part(s) galery
« Reply #4 on: May 03, 2011, 06:31:49 PM »
Quote
Those pegs do look tasty... Whats the specs on those Malo?
Size, weight, material?

7075-T6 aluminum
32 mm
120 mm long
Custom machined knurling
220 g/pair
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo

If you want to place an order, just contact me using pir.bmx@gmail.com


Offline alaskan

  • Backpacker
  • ******
  • Posts: 268
Re: PiR products part(s) galery
« Reply #5 on: May 03, 2011, 06:45:43 PM »
big fan of this stuff, keep making more

Offline Mr. Acid Green

  • Backpacker
  • ******
  • Posts: 393
  • beware of the TROLL.
Re: PiR products part(s) galery
« Reply #6 on: May 03, 2011, 11:22:10 PM »
big fan of this stuff, keep making more

yea all things looking awesome , great job!  :beer:
please dont set yourself on fire.

?uest

  • Guest
Re: PiR products part(s) galery
« Reply #7 on: May 03, 2011, 11:56:52 PM »
those pegs are NASTY :beer:
how much?

LOU4130

  • Guest
Re: PiR products part(s) galery
« Reply #8 on: May 04, 2011, 12:44:33 AM »
I like most of the stuff..nice job!

...and i want a set of those pegs too! ;D :beer:

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 291
  • Innovative products
Re: PiR products part(s) gallery
« Reply #9 on: May 04, 2011, 01:25:10 AM »
Quote
those pegs are NASTY Beer
how much?


Quote
I like most of the stuff..nice job!

...and i want a set of those pegs too! Grin Beer


Thank you for the feedback.
The pegs are hand made because of the small quantity.
The price was 75 Euros/pair, shipping included.
If you are interested, send me a private message.
But I think that, by respect for the original purchaser, I'll certainly change few details...

Have a look to the following topic :

http://www.global-flat.com/smf/index.php?topic=46844.0

I can make any kind of pegs, just give me your desired specifications, and I'll make your dream pegs come true. But of course, the process will be longer, so you have to be patient.
The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo

If you want to place an order, just contact me using pir.bmx@gmail.com


Offline Kle

  • Hitchhiker
  • *****
  • Posts: 106
Re: PiR products part(s) gallery
« Reply #10 on: May 05, 2011, 01:32:17 PM »
Can you show some of your forks close up?

Offline PiR products

  • Company
  • Backpacker
  • *****
  • Posts: 291
  • Innovative products
Re: PiR products part(s) gallery
« Reply #11 on: May 05, 2011, 03:36:59 PM »
Quote
Can you show some of your forks close up?


I haven't made too much forks...and don't really have close up pics...





They will just look how you want them.
PiR only makes custom products...

I'll make new ones soon, with some new dropouts :




The website is down but you can visit my profile on facebook :
https://www.facebook.com/home.php#!/Pir.Malo

If you want to place an order, just contact me using pir.bmx@gmail.com


Offline 2flat2furious

  • GF Inhabitant
  • ********
  • Posts: 4208
Re: PiR products part(s) gallery
« Reply #12 on: May 06, 2011, 03:23:25 AM »
Would kill for one of your frames, but god damn I couldn't afford it.

Offline manu

  • Hitchhiker
  • *****
  • Posts: 161
Re: PiR products part(s) gallery
« Reply #13 on: May 06, 2011, 04:50:48 PM »
Would kill for one of your frames, but god damn I couldn't afford it.
I think you'd be surprised as to how much it would come down to if you asked Malo to make you a double diamond frame.(as simple as it gets)
Maybe post your design and ask for fellow americans whether they want the same (or come to an consensus designwise) and ask Malo to make a batch.
This way you can get a quatity discount and you can divide the shipping.

Offline MIKE EVANS

  • Cliffhanger
  • *******
  • Posts: 415
Re: PiR products part(s) gallery
« Reply #14 on: May 06, 2011, 05:45:54 PM »
Would kill for one of your frames, but god damn I couldn't afford it.
I think you'd be surprised as to how much it would come down to if you asked Malo to make you a double diamond frame.(as simple as it gets)
Maybe post your design and ask for fellow americans whether they want the same (or come to an consensus designwise) and ask Malo to make a batch.
This way you can get a quatity discount and you can divide the shipping.
This might be a very good idea TJ. From what I understand, The specs you ride or would have a frame designed around, would go over well with many riders. Plus a frame that would handle your riding as well as meet your approval, (As Im sure you would have every little detail well thought out) would probably net several buyers.

Malo, if this is an option, or idea you would consider, how many frames would it take on a pre-order before a quantity discount would take affect?
Formerly Known As Back4Good. (all the talk about people hiding behind screen names prompted me to change.)