« previous next »
Pages: [1] 2   Go Down

Author Topic: Sequence Titanamighty Pegs!  (Read 7688 times)

Aaron Frost

  • Guest
Sequence Titanamighty Pegs!
« on: February 04, 2010, 03:34:34 AM »
So stoked on these. I've wanted to do this for years! High grade Titanium alloy end caps with a hard anodize black duranotic finish.
Logged

Offline froghammer

  • GF Inhabitant
  • ********
  • Posts: 1067
Re: Sequence Titanamighty Pegs!
« Reply #1 on: February 04, 2010, 03:38:09 AM »
Are the pegs titanium as well? They're really sharp looking, that's for sure.
Logged
It truly is a romance of many dimensions, isn't it?

http://www.froghammer.com

Offline paulbrown692000

  • GF Inhabitant
  • ********
  • Posts: 1265
    • Revelation BMX
Re: Sequence Titanamighty Pegs!
« Reply #2 on: February 04, 2010, 03:45:07 AM »
looking good. 
Logged
All things in life are temporary. If going well...enjoy it, they will not last forever. If going wrong don’t worry, they can't last long either.

Offline canaryrx8

  • Backpacker
  • ******
  • Posts: 200
  • OG Flat is where it's at!
Re: Sequence Titanamighty Pegs!
« Reply #3 on: February 04, 2010, 03:50:14 AM »
those are pretty dope, if the endcaps are titanium will they be easier to make sparks with?  ;D
Logged

Offline Furball

  • GF Inhabitant
  • ********
  • Posts: 1538
  • New York rules, Boston drools!
Re: Sequence Titanamighty Pegs!
« Reply #4 on: February 04, 2010, 04:44:58 AM »
Quote from: froghammer on February 04, 2010, 03:38:09 AM
Are the pegs titanium as well? They're really sharp looking, that's for sure.

They're aluminum. Now the question is are they 6061 or 7075?


Aaron, I really like the pegs (I'm currently running knurled Pirate Peg Legs), but the knurling needs to be grippier tho. It's too blunt. What's the point of using the same knurling pattern over and over again btw?

Any info on the forks and the bar ends? Thanks!
« Last Edit: February 04, 2010, 06:40:26 AM by Furball »
Logged
Remember, grammar is the difference between "I helped my uncle Jack off a horse", and "I helped my uncle jack off a horse".

Quote from: flatalex on November 27, 2009, 11:32:16 PM
I just started getting into flatland stuff about 3 days ago and suck so far, I blame my sh*tty bike and lack of practice.

Offline Pete Brandt

  • Forkglider
  • ***
  • Posts: 31
Re: Sequence Titanamighty Pegs!
« Reply #5 on: February 04, 2010, 04:48:43 AM »
Oh Man!!! thank god you got pegs back in stock. The ends on those dom pegs keep poppin off!! Sequence is the only pegs I can ride anymore. Aaron hook this brotha up!!!
Logged

Offline kkmk

  • Hitchhiker
  • *****
  • Posts: 177
Re: Sequence Titanamighty Pegs!
« Reply #6 on: February 04, 2010, 07:54:58 AM »
Give me.
Logged

Offline EZChris

  • GF Inhabitant
  • ********
  • Posts: 3866
Re: Sequence Titanamighty Pegs!
« Reply #7 on: February 04, 2010, 03:20:11 PM »
Quote from: Furball on February 04, 2010, 04:44:58 AM
Quote from: froghammer on February 04, 2010, 03:38:09 AM
Are the pegs titanium as well? They're really sharp looking, that's for sure.

They're aluminum. Now the question is are they 6061 or 7075?


Aaron, I really like the pegs (I'm currently running knurled Pirate Peg Legs), but the knurling needs to be grippier tho. It's too blunt. What's the point of using the same knurling pattern over and over again btw?

Any info on the forks and the bar ends? Thanks!


Some people like to be able to pivot easier on top of knurling. If its too grippy, you cant really do this.
Logged
Proud member of the Spaff Cartel.

Offline Furball

  • GF Inhabitant
  • ********
  • Posts: 1538
  • New York rules, Boston drools!
Re: Sequence Titanamighty Pegs!
« Reply #8 on: February 04, 2010, 03:49:56 PM »
Quote from: EZChris on February 04, 2010, 03:20:11 PM
Some people like to be able to pivot easier on top of knurling. If its too grippy, you cant really do this.

Trust me, you can still do that. The knurling on Ares ERI 40, and ERI 37 pegs is way better.
Logged
Remember, grammar is the difference between "I helped my uncle Jack off a horse", and "I helped my uncle jack off a horse".

Quote from: flatalex on November 27, 2009, 11:32:16 PM
I just started getting into flatland stuff about 3 days ago and suck so far, I blame my sh*tty bike and lack of practice.

katobmx

  • Guest
Re: Sequence Titanamighty Pegs!
« Reply #9 on: February 04, 2010, 05:36:13 PM »

Quote from: EZChris on February 04, 2010, 03:20:11 PM
Some people like to be able to pivot easier on top of knurling. If its too grippy, you cant really do this.

Your correct. I have them on my back end. the knurling + the steel round end cap is perfect for pivots etc. I'm reallys surprised not many more people use sequence pegs. They really are the best.(btw I had some plastic ones on the front and the lasted for just about a year and a half  -_-)

Logged

Offline dethtrk17

  • Deathtrucker
  • ********
  • Posts: 865
    • MYSPACE
Re: Sequence Titanamighty Pegs!
« Reply #10 on: February 04, 2010, 08:40:21 PM »
I know you need somebody to test those bad boys. I vote ME!!!
Logged

Offline Jason

  • GF Inhabitant
  • ********
  • Posts: 1345
Re: Sequence Titanamighty Pegs!
« Reply #11 on: February 05, 2010, 09:37:48 AM »
Quote from: EZChris on February 04, 2010, 03:20:11 PM
Quote from: Furball on February 04, 2010, 04:44:58 AM
Quote from: froghammer on February 04, 2010, 03:38:09 AM
Are the pegs titanium as well? They're really sharp looking, that's for sure.

They're aluminum. Now the question is are they 6061 or 7075?


Aaron, I really like the pegs (I'm currently running knurled Pirate Peg Legs), but the knurling needs to be grippier tho. It's too blunt. What's the point of using the same knurling pattern over and over again btw?

Any info on the forks and the bar ends? Thanks!


Some people like to be able to pivot easier on top of knurling. If its too grippy, you cant really do this.

 :beer:
Logged
NOR-CAL FLATLAND.  !!WE Bicycles supporter!!

Day Smith Beanies

Offline marsan_flatland

  • Hitchhiker
  • *****
  • Posts: 139
Re: Sequence Titanamighty Pegs!
« Reply #12 on: February 05, 2010, 09:58:07 AM »
Hoe much ?......... i f*cking want those !!! look perfect
Logged

Aaron Frost

  • Guest
Re: Sequence Titanamighty Pegs!
« Reply #13 on: February 05, 2010, 11:14:54 PM »
The body of the pegs are 6061; however, that is not an issue with the design. it should be added that the knurling is hard anodized to increase wear resistance. Expence was not considered to much, meaning, you'll get what you pay for. Flatland fuel will have these week after next for $85.00.
Logged

Offline nika

  • Cliffhanger
  • *******
  • Posts: 440
Re: Sequence Titanamighty Pegs!
« Reply #14 on: February 06, 2010, 12:06:02 AM »
They look great!

So are they called "Titanamighty" then...?

Dammit i feel so british right now
Logged
sausages and plants and goldfish
Pages: [1] 2   Go Up
« previous next »