Global-flat.com Board
English => Parts & Bikes => Topic started by: Corrupted account on June 30, 2010, 10:28:42 PM
-
all my parts are stock on my KHE Militant ff but my new stem/bar combo. I put them on and now my headset is loose. I have taken it apart about 50 times and each time it is still loose. I even regreased it. I also have 2 spacers on it, anymore and it seems like it wouldn't have enough space for the stem/bars. Any help??
-
what bars do you have ?
swissmiss ?
did you first lossen the compression bolt then lossen the stem bolt the tighten the compresion bolt and next the stem bolts ?
and is the top of the stem on the bars even with the top of the for steerer tube if soo add 1 more spacer if not its like just tightening the bolt not compresing
good luck ;D :beer:, flatriderbmx
-
You want there to be some room between the top of the fork and the top of the stem. The stem should be at the very least, a little bit higher than the fork so that proper compression can take place.
-
spacers