Flatmattersonline - Aaron Frost and the Sequence Frame!

Source: Flatmattersonline
URL of the article: http://www.flatmattersonline.com/aaron-frost-and-the-sequence-frame
Bookmark and Share

IMG_0207

I caught up with Aaron Frost at Sequence recently to discuss his new frame project that I spotted on his FB page. Naturally I was curious as to what’s he’s up to and to find out some details about this project. Read on:

Aaron I just saw you are making frames? Under the Sequence name, what’s the deal?
Well I had a good friend of mine, whom coincidentally made all the various Sequence handle bars, ask me if I was interested in designing a frame. That friend is Matt Beuntampo, owner of Livin Metal. He has been building frames for himself and a handful of friends so I didn’t want to pass up an opportunity to get a handmade frame to my specifications.

What are the specs of the frame?
While keeping in mind I run zero offset, I decided I wanted something that would feel similar to a normal offset. I kept the back end short but went with a 20.5″ top tube. The back end is 12.4″ slammed but can be run all the way to 13.0″ if desired. Mine is currently at 12.75″. I went with an average head tube angle of 75 and a 69 deg. seat tube angle. I decided to run a mid bottom bracket and it sets at 10 inches from the floor to the center of the BB. We used double butted tubing with it being tapered for the seat stays and chain stays.

IMG_0206

IMG_0205

I always thought you would make a frame, as your parts are widely used within the flatland community for years. Firstly what’s taken so long, and why now?
As most people know, my first frame sponsor was London Bikes followed by St. Martin and then Sick Child. I was always content with running a parts company while riding for a frame sponsor. Frames are so subjective and can vary dramatically. I didn’t see the point in making frames while the market was both saturated and while being content with what I was using. I wanted something longer and after Matt asked me if I wanted to design a frame I decided why not? I have done a lot in the industry and have been riding longer than some pros have been alive…. lol. What I am saying is, I at least have enough experience to decide what I should be riding. If others like the design…. even better.

What are you looking for in a frame Aaron?
Function first while hoping the aesthetics are appealing. Clean welds are a must. I wanted blended tube to dropout junctions for clearance. I personally needed more room up front because I run zero offset; however, if enough interest is expressed I can make a shorter version. That said, the back end is short and will remain that way. I wanted moderate angles with a decent sloping top tube. It was also important to have smaller tubing for the front triangle, which is 1-1/4″ OD.

When do you think the frame will be available?
It wouldn’t feel right releasing an untested frame prematurely and I won’t move forward without the flatland communities interest. Frames are expensive and it’s a big investment. If things work out with testing and my manufacturer…. I could see a 2016 fall release.

IMG_0204

Where are the frames being made at?
As previously stated, my friend Matt built this one and my intentions are to have him, Livin Metal, build a production run if things work out that way.

It’s awesome you entered the frame market, independent style, do you see yourself making customs for people? Or a specific design?
If someone wants a custom frame I would recommend going to a custom frame builder. I would like to release a specific design and I firmly believe this helps to keep costs down.

Anything else you want to add to this Aaron?
I was tempted to keep this whole project quiet till testing was complete; however, I think the results from exposure will help determine the direction of the project moving forward. I am working on some other projects involving Sequence for 2016. I had a horrible experience with overseas production in 2014 so I can assure you…. anything I do will be made here in the United States. I would like to take the time to thank Matt for doing such an awesome job on this prototype! If anyone has any interest or questions please feel free to ask here or contact me through email: sequencebmx@gmail.com

Thanks for your time Aaron, good luck with the frame project!

More from the same site:

Flatmattersonline: Matthias Dandois wins Caen BMX Indoor!  
Posted: 59 minutes ago
 
Flatmattersonline: Martti Kuoppa launches Master of Creativity 2017!  
Posted: 1 hour ago
 
1 videos in that post Flatmattersonline: Old School Sundays with Skyway Team  
Posted: 13 hours ago
 
1 videos in that post Flatmattersonline: Sebastian Grubinger – Ruins  
Posted: 13 hours ago
 
1 videos in that post Flatmattersonline: Brandon Derbowka – February 25, 2017  
Posted: 13 hours ago
 
1 videos in that post Flatmattersonline: Raw X Games 2001 Practise Footage  
Posted: 2 days ago
 
1 videos in that post Flatmattersonline: Misael S Mizo got First Place at Fight the Winter  
Posted: 2 days ago
 
1 videos in that post Flatmattersonline: Jason Forde – UKGRIP V.2 2017  
Posted: 2 days ago
 
1 videos in that post Flatmattersonline: Khaled Huerta – Spin and switch it  
Posted: 2 days ago
 
1 videos in that post Flatmattersonline: Martti Kuoppa – X Games 2001  
Posted: 2 days ago
 
Flatmattersonline: When a free registration to the 2017 iBMXff World Championships!  
Posted: 3 days ago
 
1 videos in that post Flatmattersonline: Percy Marshall – Sequence 01  
Posted: 3 days ago
 
1 videos in that post Flatmattersonline: George Kikos – February 2017 clips  
Posted: 3 days ago
 
Flatmattersonline: UK Flatland Championships – 18/19th March  
Posted: 4 days ago
 
1 videos in that post Flatmattersonline: Throwback Thursdays with Trevor Meyer & Paul Osicka  
Posted: 4 days ago
 
1 videos in that post Flatmattersonline: Mario García – Flat Vol.1  
Posted: 5 days ago
 
1 videos in that post Flatmattersonline: Mizo, Lucas, Pekeno and Malte – Fight the Winter 2017  
Posted: 5 days ago
 
1 videos in that post Flatmattersonline: Davis Dudelis – Fight the Winter 2nd Run  
Posted: 6 days ago
 
1 videos in that post Flatmattersonline: Fight The Winter 2017 – First Run Pro Highlights  
Posted: 6 days ago
 
Flatmattersonline: Downunderground Video Round 2017  
Posted: 6 days ago
 
LIVE FEED
Matthias Dandois wins Caen BMX Indoor!  posted: 59 minutes ago 
★2/25  posted: 8 hours ago 
★2/26  posted: 8 hours ago 
Old School Sundays with Skyway Team  posted: 13 hours ago 
Sebastian Grubinger – Ruins  posted: 13 hours ago 
★2/24  posted: 1 day ago 
Raw X Games 2001 Practise Footage  posted: 2 days ago 
Jason Forde – UKGRIP V.2 2017  posted: 2 days ago 
Martti Kuoppa – X Games 2001  posted: 2 days ago 
Percy Marshall – Sequence 01  posted: 3 days ago 
New video submitted by user  posted: 3 days ago 
New video submitted by user  posted: 3 days ago 
NASS - iBMXff World Championships  posted: 3 days ago 
★2/22  posted: 3 days ago 
★2/23  posted: 3 days ago 
EVOLUÇÃO  posted: 4 days ago 

Support global-flat - Join the team | | | Bookmark and Share | Logo | contact: info@global-flat.com
Copyright © global-flat.com